INS325-3 8/54
to detect a movement of an intruder, and to activate an alarm on a control
panel. The product must be connected to a listed burglar system compatible
control unit or power supply unit, which provides a supply voltage between 9
and 15 VDC as well as a minimum 4 hours of standby power.
Installation guidelines
• The technology used in these detectors resists false alarm hazards. However,
avoid potential causes of instability such as:
• Avoid mounting the detector where objects may interfere with the antimasking
function (<1m), above doors, near curtains etc.
• The detector should not be mounted in direct sunlight.
• Not suitable for outdoor use.
To Next Page
Loading...
