Need help?Do you have a question about the Texecom Premier RKP4 and is the answer not in the manual?
Instructions for opening the RKP8/16 Plus keypad using a flat-blade screwdriver.
Instructions for opening the RKP4/8/16 keypad using a flat-blade screwdriver.
Assigning a unique address to each keypad using the DIP switch on the PCB.
Guidance on routing cables through the RKP4/8/16 keypad using designated holes or channels.
Connecting the keypad to the control panel using 4-core cable, including pinout details.
Procedure to confirm connected devices on RKP keypads via the panel's firmware.
Details operating voltage, current consumption, zone indicators, and temperature ranges.
Compliance with RoHS and WEEE directives, and suitability for EN 50131 standards.
Information on the two-year warranty for the Premier RKP8/16 Plus.
To Next Page
General
