10. Winter Storage Instructions
We strongly recommend that your MidgeaterMax is thoroughly cleaned
as per the cleaning instructions previous and also by using the supplied
winter kit (contact helpline if winter kit is required) before winter storage.
By following the instructions below, this should help to prevent any
future problems arising on start-up next season.
Insert cork supplied
Apply Velcro supplied
1. After removal of service panel, insert the cork into the exhaust
chimney and apply the Velcro strip to cover the combustion unit air
holes.
2. Remove any remaining bait sachets from bait holder.
3. Cover MidgeaterMax, preferably with a MidgeaterMax storage cover.
(see www.texol.co.uk or contact distributor) and store in a dry place,
i.e. garage or garden shed.
NOTE: *WINTER KIT TO BE REMOVED PROIR TO SPRING START-UP*
To Next Page
Loading...