6. Ensure vacuum chamber door is closed.
7. Ensure that the grey lever on the click/on regulator is in the
vertical position (on) and gas bottle chamber door is closed.
8. When starting from cold the system will have to be primed i.e. hold
black button in for approx. 15 seconds. This lets the gas flow through
the hose.
9. Press black button and hold in position.
10. After 5 seconds press red igniter button (keeping the black button held
down) until a pop is heard, the gas has now ignited.
11. Keep the black button held down until the power indicator needle has
moved between the red and the green section. This should take
approximately 90 seconds (please note that if the black button is
Safety
Button
(black)
Igniter
Button
Power
Indicator
To Next Page
Loading...