4
Important Safety Information
Electric shock and fire hazard:
tDo not expose this unit to rain or moisture.
tDo not use the unit if it is wet or damaged.
tUse this unit for the manufacturer’s intended purpose only, as described in this manual.
Anyotheruse can impair the protection provided by the unit.
Failure to observe these warnings could result in severe injury or death.
Electric shock hazard:
tDo not open the case, except for the battery compartment.
tBefore opening the case, release the trigger, unplug the thermocouple probe from the unit, and
shut off the unit.
Failure to observe these warnings could result in severe injury or death.
This unit is not intended for medical applications.
Failure to observe this warning could result in severe injury or death.
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
CLASS II LASER PRODUCT
CAUTION–CLASS 2
LASER RADIATION WHEN OPEN
LASER RADIATION–DO NOT
STARE INTO BEAM
Max. Output <1 mW,
Wavelength: 635-660 nm
Complies with 21 CFR, Chapter 1, subchapter J
Laser hazard:
tAvoid laser exposure.
tDo not point laser directly at eye or at reflective objects.
Failure to observe these precautions may result in injury.
w ww. . com
information@itm.com1.800.561.8187