6
CE Certification
This instrument conforms to the following standards:
tEN50081-1:1992, Electromagnetic Emissions
tEN50082-1:1992, Electromagnetic Susceptibility
Readings may be affected if the unit is operated with a radio frequency electromagnetic field of
approximately 3 volts per meter, but the performance of the instrument will not be permanently
affected. From 200 to 600 MHz, the maximum error is 10 °C (18 °F).
CFR 21 1040.10 and 1040.11
Performance Standards for Light-Emitting Products
Important Safety Information
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...