14
FEATURES AND CONTROLS
Brake Pedal
The brake pedal is located on the floor to the left of the accelerator pedal. The brake pedal function is to slow or stop the moving vehicle.
Park Brake
This vehicle is equipped with an InteliBrake™ system on the motor. The park brake will automatically engage when the accelerator has been released and the
vehicle drops below 2 MPH or the key switch is in the “OFF” position. See “Park Brake Release” for towing and loading information. For disengaging without
motor power see “Emergency Park Brake Release”.
Charger Receptacle
The polarized receptacle for charging the batteries is located under the dash on the driver
side. The cover must be opened to access the receptacle.
Taillights
The taillights are located in the rear fenders.
Side Nets
Side nets are a standard safety feature provided with the vehicle and must be properly
secured before operating vehicle.
Seat Belts
The vehicle is equipped with seat belts for the driver and passengers. Seat belts must be
worn at all times by all occupants when vehicle is in motion.
For more operational and safety information, see Seat Belt Operation on page 21.
Charger
Receptacle
Seat Belt
Side Net
To Next Page
Loading...
Need help?
General
