Introduction
Welcome to the TEXWRAP 2219 series L-Sealer Wrapper!
This manual covers the operations and parts labeling of the 2219 L-Sealer machine.
The majority of the TEXWRAP 2219 machine controls are located in the machine’s swivel touch-pad
interface. TEXWRAP recommends you read this manual and familiarize yourself with the controls,
terminology and operations of this machine before attempting any of the following procedures including
the basic installation of this equipment.
The TEXWRAP model 2219 is a horizontal form, fill and seal. The L-Sealer seal head is pneumatically
operated, with all other functions performed with VFD AC motors. All moving parts have been covered
with safety interlocked guards so as to keep the user safe.
NOTE: If your machine is the Enhanced Version, all time based
screens will show distance based items, i.e. Rear Bag Timer will
now be Rear Bag Distance.
The distance based feature means that as the belt speed changes, settings
such as front and rear bag will not have to be changed to accommodate the
new speed setting.
To Next Page