EasyManua.ls Logo

TFA 35.1158.01 - Page 13

TFA 35.1158.01
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2524
ELEMENTS – Wireless weather station
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks. Protect it from moisture!
• The outdoor transmitter is splash proof, but not watertight. When placed outdoors, choose a dry place for the transmitter.
5. Elements
5.1 Base station (Receiver)
A: LCD display (Fig. 1):
A 1: Reception symbol for the transmitter, channel number and symbol for alternating channel
A 2: Symbol for MAX/MIN A 3: Outdoor temperature
A 4: Outdoor humidity A 5: Battery symbol for the transmitter
A 6: Trend arrow A 7: Indoor temperature
A 8: Battery symbol for the base station A 9: Indoor humidity
A 10: Moon phase A 11: Alarm symbol 1+2
A 12: Symbol Daylight Saving Time (DST) A 13: DCF reception symbol
A 14: Snooze symbol A 15: Time with seconds
A 16: Time display with time zone A 17: PM in 12-hour-format
A 18: Day of the week A 19: Date
A 20: Atmospheric pressure
A 21: Bar graph indication of atmospheric pressure for the last 12 hours
A 22: Weather forecast with symbols A 23: Frost alarm
ELEMENTS – Wireless weather station
B: Buttons (Fig. 2):
B 1: SNOOZE/LIGHT button B 2: button
B 3: button B 4: (MAX/MIN) button
B 5: button B 6: button
C: Housing (Fig. 3):
C 1: Wall mounting hole C 2: Battery compartment
C 3: Stand (fold out)
5.2 Transmitter (Fig. 4):
D 1: Wall mounting hole D 2: °C/°F button
D 3: Battery compartment D 4: 1/2/3 switch for channel selection
D 5: Stand D 6: Transmission indication LED
D 7: Transmission signal D 8: Outdoor temperature
D 9: Outdoor humidity D 10: Channel 1,2,3
D 11: Battery symbol for the transmitter
6. Getting started
6.1 Insert the batteries
• Remove the protective films from the display of the base station and the transmitter.
• Open the battery compartments of the transmitter and receiver and place both instruments on a desk with a distance of
approximately 1.5 meter from each other. Avoid being close to possible sources of interference such as electronic devices
and radio equipment.
TFA_No. 35.1158_Anleitung_multi 20.08.2020 15:48 Uhr Seite 13