2322
RAINMAN – Wireless rain station with indoor/outdoor temperature
RAINMAN – Wireless rain station with indoor/outdoor temperature
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment
Directive (WEEE).
Please do not dispose of this product in ordinary household waste. As a consumer, you are
required to take end-of-life devices to a designated collection point for the disposal of electrical
and electronic equipment, in order to ensure environmentally-compatible disposal.
14. Specifications
Base station
Measuring range temperature -10°C…60°C (14°F…140°F)
Resolution 0,1 °C ( 0,1 °F)
Power consumption Batteries 2 x 1,5 V AA (not included)
Housing dimension 109 x 38 x 99 mm
Weight 112 g (device only)
Rain sensor
Rainfall amount 0…999,9 mm (99.99 Inches)
Resolution 0,1 mm
Housing dimension 155 x 107 x 134 mm
Power consumption Batteries 2 x AA 1,5 V (not included)
Weight 312 g (device only)
Temperature transmitter
Measuring range temperature -40 °C… 60°C (-40 °F …140 °F)
Resolution 0,1 °C ( 0,1 °F)
Power consumption Batteries 2 x AA 1,5 V (not included)
Housing dimension 42 x 20 x 155 mm
Weight 44 g (device only)
• Change the base station batteries, when the battery symbol appears on the time display.
• Please note: When the batteries are changed, the contact between the transmitters and the base station must
be restored – so always insert new batteries into all devices or start a manual transmitter search.
12. Troubleshooting
Problem Solution
No display ➜ Ensure the batteries' polarity are correct
➜ Change the batteries
No transmitter reception ➜ No transmitter installed
Display "---" ➜ Check the transmitter batteries (do not use rechargeable batteries!)
➜ Restart the transmitters and the base station according to the manual
➜ Start manual search for the outdoor transmitters:
Temperature transmitter: Press the DOWN button on the base station for
3 seconds and then press the TX button in the transmitter's battery com-
partment.
Rain sensor: Press the RAIN button on the base station for 3 seconds.
➜ Choose another place for the transmitters and/or the base station
➜ Reduce the distance between the transmitters and the base station
➜ Check if there is any source of interference
Incorrect indication ➜ Change the batteries
➜ Clean the rain sensor
➜ Insert the housing of the rain sensor correctly (match up the arrows)
➜ Restart the instrument according to the manual
If your device fails to work despite these measures contact the retailer where you purchased the product.
13. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and
reused.
Never dispose of empty batteries and rechargeable batteries in ordinary household waste.
As a consumer, you are required by law to take them to your retail store or to an appropriate col-
lection site depending on national or local regulations in order to protect the environment.
The symbols for the contained heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead
TFA_No. 47.3004_Anleitung 17.01.2017 12:03 Uhr Seite 12
To Next Page
Loading...
