1716
FUN – Wireless thermometer
4. For your safety
• This product is exclusively intended for the range of application
described above.
• This product should only be used as described within these
instructions.
• Unauthorized repairs, alterations or changes to the product are
prohibited.
Caution!
Risk of injury:
• Keep these devices and the batteries out of reach of children.
• Batteries must not be thrown into a fire, short-circuited, taken
apart or recharged. Risk of explosion!
• Batteries contain harmful acids and may be hazardous if swal-
lowed. If a battery is swallowed, this can lead to serious internal
burns and death within two hours. If you suspect a battery
could have been swallowed or otherwise caught in the body,
seek medical help immediately.
• Low batteries should be changed as soon as possible to prevent
damage caused by leaking. Never use a combination of old and
new batteries together, nor batteries of different types.
• Wear chemical-resistant protective gloves and safety glasses
when handling leaking batteries.
Important information on product safety!
• Do not expose the devices to extreme temperatures, vibrations
or shocks.
• Protect the base station from moisture.
• The outdoor transmitter is splashproof, but not watertight.
When placed outdoors, choose a dry place for the transmitter.
FUN – Wireless thermometer
5. Elements
5.1 Base station (Receiver)
A: Display (Fig. 1):
A 1: Trend arrow for outdoor temperature
A 2: Battery symbol for the transmitter
A 3: Outdoor temperature
A 4: Battery symbol for the base station
A 5: Indoor temperature
A 6: Min. values
A 7: Max. values
A 8: Channel number
A 9: Reception symbol
B: Buttons (Fig. 2):
B 1: CH button
B 2: MAX button
B 3: MIN button
C: Housing (Fig. 2):
C 1: Stand (fold out)
C 2: Mounting hole
C 3: Battery compartment
5.2 Transmitter (Fig. 3):
D 1: LED signal lamp
D 2: TX button
D 3: 1 2 3 switch for channel selection
D 4: Battery compartment
D 5: Mounting hole
TFA_No. 30.3068_Anleitung 14.08.2019 11:21 Uhr Seite 9
To Next Page
Loading...
