Need help?Do you have a question about the TFA FLASH III and is the answer not in the manual?
Introduction to the compact and easy-to-use non-contact infrared thermometer and its capabilities.
Highlights essential functionalities including unit switching, memory, and laser pointer.
Explains the principle of sensing infrared energy and translating it into a digital reading.
Steps for preparing the unit for use, including battery insertion and display protection removal.
Instructions on how to aim the device, press the scan button, and read temperature measurements.
Critical warnings regarding direct laser beam exposure and safe usage practices.
Factors affecting measurement accuracy, including distance, spot size, and surface properties.
Details on switching units, using Min/Max mode, and activating the lock function.
Guidance on adjusting the emissivity for precise readings on various surfaces.
Instructions for changing batteries in the unit's separate compartments.
Advice on protecting the device from EMI, thermal shock, and environmental factors.
Notes on measuring specific surfaces and avoiding obstructions to the optics.
Recommendations for cleaning the sensor lens and maintaining the unit.
Detailed specifications including temperature range, accuracy, and dimensions.
Explanation of displayed error codes and steps for resolving them.
Introduction to the compact and easy-to-use non-contact infrared thermometer and its capabilities.
Highlights essential functionalities including unit switching, memory, and laser pointer.
Explains the principle of sensing infrared energy and translating it into a digital reading.
Steps for preparing the unit for use, including battery insertion and display protection removal.
Instructions on how to aim the device, press the scan button, and read temperature measurements.
Critical warnings regarding direct laser beam exposure and safe usage practices.
Factors affecting measurement accuracy, including distance, spot size, and surface properties.
Details on switching units, using Min/Max mode, and activating the lock function.
Guidance on adjusting the emissivity for precise readings on various surfaces.
Instructions for changing batteries in the unit's separate compartments.
Advice on protecting the device from EMI, thermal shock, and environmental factors.
Notes on measuring specific surfaces and avoiding obstructions to the optics.
Recommendations for cleaning the sensor lens and maintaining the unit.
Detailed specifications including temperature range, accuracy, and dimensions.
Explanation of displayed error codes and steps for resolving them.
General| Resolution | 0.1°C |
|---|---|
| Material | Plastic |
| Power | Batteries |
| Display | LCD |
| Battery Type | AAA |
| Battery Life | Approximately 2 years |
To Next Page
