Need help?Do you have a question about the TGW CRUZbelt and is the answer not in the manual?
Covers TGW Systems' warranty terms for material and workmanship of equipment.
Provides general safety instructions and recommends lockout/tagout procedures.
Outlines safety risk evaluation and compliance with national and industry standards.
Details TGW's recommended standards for conveyor safety and industry guidelines.
Provides examples of labels applicable to conveyor standards and their placement.
Details critical warnings and safety instructions for safe conveyor operation and maintenance.
Provides guidelines for conveyor controls, including start/stop buttons, emergency stops, and logic.
Details site preparation steps, including clearing the path and cleaning the area.
States that installation methods are guidelines and may vary based on site conditions.
Describes establishing reference points for accurate conveyor path alignment.
Covers electrical controls, gearmotor specifications, and wiring for CRUZbelt conveyors.
Details the procedure for activating the gear motor, including vent and sealing plug removal.
Explains how to square conveyor sections to prevent belt mistracking.
Covers setting conveyor elevations and ensuring proper leveling during installation.
Step-by-step guide for setting up the conveyor, including leveling and alignment.
Instructions for assembling guardrails on the CRUZbelt conveyor.
Details on aligning the belt using cam and snubber bracket adjustments.
Instructions for tracking the conveyor belt to ensure proper alignment and movement.
Defines commissioning as final adjustments and tests for proper equipment operation.
Procedure for checking conveyor components without power before operation.
Procedure for checking conveyor operation with power, but no product.
Outlines daily, weekly, monthly, and annual preventive maintenance tasks for CRUZbelt.
Provides a guide to diagnose and resolve common belt problems and their remedies.
Diagnoses common gearmotor issues like starting problems, overheating, and running issues.
Troubleshooting guide for chain and sprocket issues like slack, wear, and misalignment.
Troubleshooting guide for bearing problems such as vibration, noise, and seizure.
General| Brand | TGW |
|---|---|
| Model | CRUZbelt |
| Category | Accessories |
| Language | English |
To Next Page