Do you have a question about the Thales Cryptel-IP CE 621 and is the answer not in the manual?
Menu: Fill devices> Security password> KOI-18> Extended. Press Enter, wait for "reading...".
Menu: Fill devices> Security password> KOI-18> Basic. Press Enter, wait for "reading...".
Parameter: The TCE 621 PZI Id.
Parameter: Red IP address and subnet mask.
Parameter: Black IP address and subnet mask.
Parameter: IP address to Black Default Router.
Parameter: PZMC id. to preferred management centre.
Parameter: Use IP version 4 or 6 for management communication.
Parameter: IP address to preferred management workstation.
Parameter: IP address to preferred management front-end unit.
Insert Crypto Ignition Key (Smart-Card). Switch EMERGENCY ERASE to right (off).
Switch Power ON, wait for Self Test. Display shows SOFTWARE VERSON. Press Enter.
Enter PZI Id. Enter and verify Operator password. Enter and verify Security password.
Select Data Entry from Keypad. Select Location> User-Loc.
Set Mode to Auto. Set KVT distribution control (Conditional or Unconditional).
Enter Own IP addresses, subnet masks, and router IP. Set IP version. Enter management workstation/front-end IPs.
Select IP-Params (TOS+TrafficClass, Flow Label). Set time: Year, Month, Day, Hour, Minute, Second.
Menu: Fill devices> Security password> DTD> Red Key. Select Xmit> Fill. Connect DTD to TCE 621. Press Enter.
Menu: Fill devices> Security password> Smart-Card. Follow display instructions. Insert smart-card, press Enter.
| Brand | Thales |
|---|---|
| Model | Cryptel-IP CE 621 |
| Category | Network Hardware |
| Language | English |
Loading...