Thames & Kosmos Alien Robots - TIPS FOR ASSEMBLY; The Anchor Pin Lever; Batteries


› › › TIPS FOR ASSEMBLY
THE ANCHOR PIN LEVER
Side A of the lever can be used to easily
remove anchor pins.
Side B can be used to loosen firmly
inserted parts, such as axle plugs.
BATTERIES How to insert and remove the batteries
Open the battery compartment by sliding the lid open. Insert two batteries. Make sure you fit
the positive and negative ends into the compartment in the direction indicated (with the correct
polarity). Then close the compartment. When it is time to replace the batteries, remove the old
batteries and insert the new ones with the correct polarity.
1
2
3
How to open the battery box
Slide and open the battery box lid.
Slide and close the battery box lid.
Put 2 AA battery in.
OK
1
2
3
How to open the battery box
Slide and open the battery box lid.
Slide and close the battery box lid.
Put 2 AA battery in.
OK
1
2
3
How to open the battery box
Slide and open the battery box lid.
Slide and close the battery box lid.
Put 2 AA battery in.
OK
2 3
1