EasyManua.ls Logo

The Basement Watchdog Big Combo User Manual

The Basement Watchdog Big Combo
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instruction Manual &
Safety Warnings
IMPORTANT: Even if you have the Basement Watchdog sump pump system installed by
someone else, you must read and follow the safety information contained in this manual.
Failure to do so could result in property damage, serious injury, or death.
Table of Contents
Important Safety Warnings and
Instructions
Electrical precautions 1
Battery preparation 1
Battery precautions 1
Introduction
Items included in system 2
Additional items needed 2
System specifications 2
Installing the Pipe and Pump 3
Preparing the Battery 4,5
Battery Maintenance 5
System Connections
Mounting the backup control unit 5
Connecting the backup pump 5
Installing the battery fluid sensor 5
Connecting the battery 6
Connecting the charger 6
Connecting the primary pump 6
Product Operation 6
Understanding the Warning
Lights and Alarms
Silencing the alarm during
an emergency 7
Battery alarm 7
Cleaning the battery terminals 7
Replacing the battery 8
Fuse alarm 9
Water alarm 9
Pump alarm 10
Replacing the backup pump 10
Replacing the primary pump 10
Power alarm 11
Charging 12
System operating 12
Testing the System
Test-Reset-Silence button 12
Testing the float switches 12
Using the Remote Notification
Remote Terminal 12
Remote Alarm 12
USB Data Port 12
Connect Modules 12,13
Maintenance Check List 13
Parts & Service Information
Technical support 13
Replacement Parts Diagram & List 13
Troubleshooting Guide 14
Warranty 15
Combination Primary and
Backup Sump Pump System
This manual is for the systems that have the BWSP-A backup controller, which can accommodate
maintenance or maintenance free batteries. See pages 2-6 for additional information.
Question and Answer IconNeed help?

Do you have a question about the The Basement Watchdog Big Combo and is the answer not in the manual?

The Basement Watchdog Big Combo Specifications

General IconGeneral
BrandThe Basement Watchdog
ModelBig Combo
CategoryWater Pump
LanguageEnglish

Summary

Safety and Precautions

Electrical Safety Warnings

Discusses electrical hazards, grounding, and necessary precautions to avoid shock or fire.

Battery Safety and Handling

Covers safe handling of battery acid, managing explosive gases, and terminal precautions.

System Introduction and Components

System Overview and Included Items

Details the system's primary and backup capabilities and lists all components included in the package.

Required Supplies and Specifications

Lists items the user must supply and provides technical specifications for the sump pump system.

Installing the Sump Pump System

Sump Pit and Discharge Pipe Setup

Guides on fitting the system into the sump pit and connecting the discharge pipe for proper function.

Lowering and Securing the Pump

Instructions for placing the pump assembly into the sump and connecting it to the discharge pipe.

Battery Preparation and Activation

Battery Type Recommendations

Advises on suitable battery types and warns against using automotive or incompatible batteries.

Filling the Battery with Acid

Provides a step-by-step guide for safely adding acid to dry-cell batteries to activate them.

System Setup and Connections

Mounting the Control Unit

Instructions for positioning the backup control unit in a well-ventilated area.

Battery Maintenance Guidelines

Outlines periodic checks for battery fluid levels and proper sensor installation.

Connecting System Components

Covers initial wiring and connection of pumps, sensors, and the control unit.

Product Operation and Testing

Connecting Specific Components

Details connecting the fluid sensor, battery cables, and the primary pump controller.

System Functionality and Testing

Explains how the system operates and provides instructions for testing control buttons.

Warnings, Alarms, and Battery Maintenance

Understanding System Alarms

Explains various warning lights, audible alarms, and their corresponding meanings.

Silencing Alarms and Emergency Actions

Provides methods to silence alarms and outlines actions for emergency situations.

Cleaning Battery Terminals and Cables

A detailed procedure for cleaning battery terminals and connectors to ensure proper function.

Battery Replacement Procedure

Battery Replacement Safety Precautions

Highlights critical safety warnings and dangers before undertaking battery replacement.

Steps for Replacing the Battery

Provides step-by-step guidance on safely removing an old battery and installing a new one.

Troubleshooting Alarms and Pump Replacement

Troubleshooting Specific Alarms (Fuse, Water)

Addresses issues indicated by the fuse and water alarms, providing solutions.

Replacing the Backup Sump Pump

A step-by-step guide for removing the old backup pump and installing a new one.

Replacing the Primary Pump

Primary Pump Replacement Safety

Details essential safety warnings and precautions for primary pump replacement.

Steps for Replacing the Primary Pump

Provides a sequential guide on how to remove and install the primary pump.

Remote Notification and Connectivity

Remote Terminal Setup

Instructions for connecting the system to a remote alarm or security system.

USB Data Port and Modules

Information on the USB data port for connecting modules and staying informed remotely.

Maintenance, Parts, and Service

Scheduled Maintenance Checklist

Provides a list of recommended periodic maintenance tasks for the system.

Parts and Service Information

Details how to obtain technical support, replacement parts, or service.

Troubleshooting Guides

Primary Pump Troubleshooting

Guides for diagnosing and resolving issues with the primary sump pump.

Backup Pump Troubleshooting

Guides for diagnosing and resolving issues with the backup sump pump.

Limited Warranty Information

Warranty Coverage and Exclusions

Details what the product warranty covers and what specific conditions are excluded.

Obtaining Warranty Service

Provides instructions on how to submit a product for warranty service and eligibility requirements.

Related product manuals