IMPORTANT: Even if you have the Basement Watchdog Special CONNECT
backup sump pump system installed by someone else, you must read
and follow the safety information contained in this manual. Failure to
do so could result in property damage, serious injury, or death.
Instruction Manual & Safety Warnings
Battery Backup Sump Pump System
Model BWSP
Table of Contents
Important Safety Warnings
and Instructions
El
ectrical Precautions 1
Battery Preparation 1
Battery Precautions 1
Introduction
Items Included in System 2
Additional Items Needed 2
Replacement Parts List 2
System Specifications 2
Pump & Pipe
Installation Instructions
Installation Options 3
Direct Discharge to Outside 4
Connection to Existing Discharge 5
Direct Discharge for Narrow Sumps 6
Connection to Existing Discharge
for Narrow Sumps
7
Battery Instructions 8
Control Unit Connections
Positioning the Float Switch 8
Connecting the Pump 8
Connecting the Battery 8
Connecting Two Batteries 8
Connecting the Charger 8-9
Understanding the Warning & Alarms
Silencing the Alarm
During an Emergency 9
Battery Alarm 9
Cleaning Battery Terminals 10
Replacing the Battery 10-11
Fuse Alarm 11
Pump Alarm 11
Replacing the Pump 11-12
Power Alarm 12
Charging 12
System Operating 12
Testing the System
Test-Reset-Silence Button 12
Testing the Float Switch 12
Using the Remote Notification
Remote Terminal 13
Remote Alarm
13
USB Data Port 13
Connect Module 13
Maintenance Checklist 13
Parts & Service Information
Technical Support 13
Replacement Part Numbers 13
Two Ways to Increase
your Warranty
13
Troubleshooting Guide 14
Warranty 15
Scan this QR code for
more information about
the BWSP
Need help?
General
To Next Page
