
Do you have a question about the The Land of Nod Elevate and is the answer not in the manual?
| Brand | The Land of Nod |
|---|---|
| Model | Elevate |
| Category | Baby & Toddler Furniture |
| Language | English |
Failure to follow warnings can result in injury or death. Infants can suffocate.
Ensure complete construction before use. Follow guidelines to prevent strangulation, entrapment, and SIDS risk.
Lists and illustrates all bolts, washers, brackets, and tools required for assembly.
Identifies the main structural parts of the crib, including panels and legs.
Attach the legs to each base panel using medium bolts, spring washers, and flat washers.
Fit base panels into side panels and secure corners with bolts, washers, brackets, and tighten leg bolts.
Place the bottom panel into the assembly and ensure it is securely supported.
Attach each side panel to the end panels using small bolts, spring washers, and flat washers.
Insert one corner support into each corner of the crib assembly at the desired height.
With assistance, carefully place the mattress support onto the corresponding corner supports.
Use a large Allen wrench to secure each corner support with a bolt cap.
Engage the levelers after repositioning the crib to prevent unintentional movement.
Periodically check and tighten all screws, bolts, and fasteners for security.
Clean surfaces with a mild dish soap solution and a soft cloth; avoid abrasive cleaners.
Store the crib in a cool, dry place away from moisture and extreme temperatures for long-term storage.
Loading...