The Land of Nod Palm Springs User Manual

The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: customerservice@landofnod.com • www.landofnod.com
This page lists the contents included in the box. Please take
time to identify the hardware as well as the individual
components of the product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage. Please follow the assembly
instructions closely. Improper assembly can result in
personal or property damage.
Note: 2 adults are required to safely assemble this product.
Palm Springs Playhouse Assembly Instructions
Page 1 of 6
Made in China - r03
4 - Pole A
6 - Pole B
4 - Pole F
F
2 - Pole E2
E2
4 - Pole E1
2 - Pole D
2 - Pole C
2 3
4
1
E1
D
C
B
A
20 - Connector #4
4 - Connector #1 4 - Connector #2 4 - Connector #3
1 - Top fabric cover 1 - Bottom fabric cover
1 - Mat

The Land of Nod Palm Springs Specifications

General

Brand	The Land of Nod
Model	Palm Springs
Category	Baby & Toddler Furniture
Language	English

Summary

Introduction and Parts Identification

Product Components List

Lists all poles and connectors included in the playhouse kit for identification.

Assembly Safety Guidelines

Essential safety instructions, including the requirement for two adults for assembly.

Initial Frame Construction

Step 1: Assemble Base Frame Elements

Assemble connectors #4 with poles A and E1 to form the initial base frame structure.

Step 2: Connect Frame Sections

Join assembled frame sections using connectors #2 for structural integrity.

Adding Vertical Supports

Step 3: Install Vertical Poles

Insert poles B, C, and D into the corresponding connectors on the base frame.

Step 4: Secure Vertical Poles

Slide connectors #3 onto poles D and C to reinforce the vertical structure.

Expanding the Frame

Step 5: Add Top Horizontal Poles

Attach poles A and E to the structure using connectors #4 and #2.

Step 6: Construct Additional Frame Sections

Assemble connectors #4 with poles F and E2 for further frame construction.

Completing the Frame Structure

Step 7: Install Top Poles F

Attach poles F to the frame using connectors #4.

Step 8: Install Top Poles E2

Attach poles E2 to the frame using connectors #4.

Final Assembly and Finishing

Step 9: Finalize Top Frame

Complete the top frame by assembling connectors #1 with poles F and E2.

Step 10: Attach Fabric Covers and Carpet

Secure the top fabric cover, bottom fabric cover, and entrance carpet.