To Next PageTo Next PageWhat to do if The Pond Guy Water Pump turns on and then shuts off?
If The Pond Guy Water Pump turns on and then shuts off, ensure the pump is fully submerged for adequate cooling. Also, inspect the pump intake for any obstructions. If you're using an extension cord, make sure it's rated appropriately for the pump's electrical needs.
Why is the water flow reduced in The Pond Guy Water Pump?
If you're experiencing reduced water flow with The Pond Guy Water Pump, start by checking the pump pre-filter for any blockages. You may also need to perform maintenance cleaning on the pump. Ensure that the water level is sufficient and the pump remains completely submerged. Finally, inspect the plumbing for any obstructions.
How to troubleshoot The Pond Guy Water Pump that does not turn on?
If The Pond Guy Water Pump does not turn on, first ensure that the power cord is properly connected. Check the GFCI or main circuit breaker to see if it has tripped. Verify the GFCI is not faulty and inspect the power cord for any signs of damage.
General| Brand | The Pond Guy |
|---|---|
| Model | MagFlo Series |
| Category | Water Pump |
| Language | English |
Guides users through configuring pump setup for different applications like fountains or waterfalls.
Instructions for connecting the pump to a waterfall or water feature using outlet male tubing adapters.
Details on using the MagFlo pump in-line (out of water) to power a waterfall or feature.
Instructions on how to properly submerge the MagFlo pump in a flat area within the pond.
Guidance on connecting the MagFlo pump power cord to a GFCI protected outlet.
Step-by-step guide for cleaning the MagFlo pump, including required tools and initial removal.
Instructions on how to properly remove the pump pre-filter from the pump motor.
Guidance on washing the pump pre-filter sponge and impeller screen thoroughly with water.
Steps for removing the impeller cover and the magnetically driven impeller.
Instructions for cleaning the impeller, impeller chamber, and fountain connections.
Steps for reassembling the MagFlo pump components after cleaning.
