Transforma
™
Ladder User Manual Page 3
Welcome
Welcome
About the Transforma
™
Ladder
The Transforma
™
Ladder is a multi-purpose ladder system combining three
core components: One inner ladder unit with two outer ladder units that
slide and lock over the inner ladder unit.
The inner ladder has a central locking hinge that allows the Transforma
™
Ladder to be set up in a variety of ways:
✔ A-frame Position
✔ Extension Position
✔ Step Level Position
✔ Scaolding Trestle Position
Safety precaution:
Only use the Tranforma
™
24 and 35 120kg ladder in the A-frame with
the spreader Installed to brace the ladder.
Locking assemblies on the two outer ladder units allow the telescoping and
height adjustment of the outer ladder sections up and down the inner ladder
unit. This mechanism locks into the rungs of the inner ladder unit, allowing
adjustment at both ends of the ladder.
Why read this manual?
Following a few simple pointers will help you to avoid common mistakes
that can spoil your project. Read this manual to get the maximum use of all
congurations of the ladder and to ensure safety when using.
Support
If you experience problems with the Transforma
™
Ladder or its performance,
please call our Customer Service Team for assistance:
✔ 1800 890 840 in Australia
✔ 0800 002 999 in New Zealand
The Renovator Transforma Ladder - Instruction Manual - BDIV3.indd 3 15/09/2017 1:12:01 p.m.
To Next Page
Loading...