To Next PageTo Next Page
Need help?Do you have a question about the Theben TR 608 top and is the answer not in the manual?
General| Operating voltage | 230 V AC |
|---|---|
| Contact type | Changeover contact |
| Number of channels | 1 |
| Mounting type | DIN rail |
| Protection class | IP20 |
| Current rating | 16 A |
| Frequency | 50 – 60 Hz |
| Type | Digital timer |
| Switching capacity | 250 V AC |
| Time setting | 1 min |
Ensure installation by qualified electricians and observe all safety regulations.
Protect the time switch from strong magnetic fields to prevent damage.
Diagram illustrating the correct electrical connections for the time switch.
Guidance on inserting the lithium battery correctly, noting polarity.
Procedure for changing the battery while preserving programmed data.
Explains cursor movement and menu navigation using symbols.
Instructions for correcting input errors and handling flashing values during programming.
Describes how the channel follows the stored time program automatically.
Manually forces the channel to stay ON, overriding scheduled times.
Manually forces the channel to stay OFF, overriding scheduled times.
Guide to programming the daily ON time for a specific channel and days.
Example demonstrating how to program the daily OFF time for a specific channel and days.
Sets annual start and end dates for priority weekly programs to become effective.
Allows interrogation of the entire stored program using the ENTER button.
Enables interrogation of specific switching times, e.g., starting from Monday.
Step-by-step guide to canceling individual switching times from memory.
Procedure for canceling date-related programs and searching for additional times.
Instructions for saving programmed data from the time switch to an Obelisk memory card.
Procedure for loading data from an Obelisk memory card back into the time switch.
Overview of using Obelisk software for preparing and managing programs on a PC.
Using priority programs for automatic random switching during holidays.
Programming special ON/OFF times for connected units during holidays.
Achieving time-delayed switch-ONs using pulse programs and time adjustments.
Achieving time-delayed switch-OFFs using pulse programs and time adjustments.
Covers terms like Auto operation, automatic return, program recan, entry correction, and weekday block formation.
Explains the Obelisk memory card for data management and the RESET function for device restart.
Defines technical terms EEPROM (memory) and LCD (display) used in the manual.
