1
TR 611 top2 24 V
6114100
TR 622 top2 24 V
6224100
307086
Time switch
EN
1. Basic safety information
Danger of death through electric shock or fire!
Installation should only be carried out by a
qualied electrician!
WARNING
•
The device is designed for installation on DIN top hat
rails (in accordance with EN 60715)
•
The device corresponds to type 1 STU in accordance with
IEC/EN 60730-2-7
•
Power reserve (10 years) is reduced if memory card is
inserted (using battery power)
!
OBELISK top2 memory card: Avoid mechanical overload
and contamination during storage/transportation
2. Proper use
•
The time switch is used for lighting, ventilation and
ushing applications etc.
•
Only for use in closed, dry rooms
!
Do not use on safety devices, e.g. escape route doors, re
safety equipment etc.
!
The external outputs are designed for operating voltage
of 12-24 V AC and DC and not for 230 V.
Disposal
Dispose of device in environmentally sound manner
3. Installation and connection
Mounting the time switch
Danger of death through electric shock or fire!
Installation should only be carried out by a
qualied electrician!
WARNING
click
45° cable
Plug-in screwless
terminal
OBELISK top2
memory card
(9070404)
Test tap
Load line connection
Mount on DIN top hat rails (as dened in EN 60715)
Switched voltage-free
Ensure device cannot be switched on
Check absence of voltage
Earth and bypass
Cover or shield any adjacent live components
Connecting the cable
Wiring diagrams 6114100 / 6224100
C1
123
12-24
Strip cable to 8 mm (max. 9)
Insert cable in the open DuoFix® plug-in terminal at 45°
L 2 cables per terminal position possible
To open the DuoFix® plug-in terminal, press screwdriver
downwards
!
TR 622: With these devices the type of low voltage must
correspond to low voltage type of the supply voltage
(SELV = SELV, PELV = PELV, FELV = FELV).