Thecus N5200 User Manual

33
3. Open the front door then press the power button to boot up the
N3200XXX/N0503.
To connect N4200 series NAS to your network, follow the steps below:
1. Connect an Ethernet cable from your network to the WAN/LAN1 port on the
back panel of the N4200.
2. Connect the provided power cord into the universal power socket on the back
panel. Plug the other end of the cord into a surge protected socket.

Thecus N5200 Specifications

General

Brand	Thecus
Model	N5200
Category	Server
Language	English