Thecus N5200 User Manual

34
3. Press the power button on the Front Panel to boot up the N4200.
To connect the N5200XXX/N5500 to your network, follow the steps below:
1. Connect an Ethernet cable from your network to the WAN/LAN1 port on the
back panel of the N5200XXX/N5500.
2. Connect the provided power cord into the universal power socket on the back
panel. Plug the other end of the cord into a surge protected socket. Press the
power supply switch to turn on the power supply.
3. Press the power button on the front panel to boot up the N5200XXX/N5500.

Thecus N5200 Specifications

General

Brand	Thecus
Model	N5200
Category	Server
Language	English