Need help?Do you have a question about the Themis RES-11XR3 and is the answer not in the manual?
Initial release version of the installation manual.
Essential safety guidelines for device installation and operation.
Safety precautions for laser source devices like DVD/CD-ROM drives.
Guidelines to prevent ESD damage and proper grounding techniques.
Instructions and warnings for handling the system's lithium battery.
General description of the RES-11XR3 server.
Details the Intel X58 Express chipset and its features.
Explains system health monitoring features like voltage and fan status.
Covers power management settings, LEDs, and system states.
Describes the Super I/O chip and Winbond WPCM450 controller.
Details system LEDs and rear panel I/O connectors.
Lists general, electrical, and environmental specs.
Info on packaging, accessory kit, and rack-mount slides.
Step-by-step guide for installing components like memory, PCI cards, drives.
Instructions for installing mounting brackets and optional rack-mount slides.
Covers plugging in power, turning the system on/off, and initial setup.
Explains navigation of the AMI BIOS Setup Utility.
Details advanced system settings, processor, and clock options.
Settings for configuring IDE, SATA, and Floppy drive parameters.
Options for setting supervisor/user passwords and access levels.
Settings for prioritizing boot devices and configuring boot options.
How to save, discard, or load BIOS settings.
Pinout/signal definitions for PS/2 keyboard/mouse connectors.
Pinout descriptions for USB ports (rear and internal).
Pinout definitions for COM1 serial port and signal definitions.
Pinout/signal descriptions for RJ45 Gigabit Ethernet LAN ports.
Pinout/signal descriptions for the VGA graphics display port.
Shows screw hole patterns on chassis for mounting slides.
Detailed steps for installing steel rack-mount slides.
Introduces the Red Hat Enterprise Linux installation guide.
Covers the step-by-step process for installing RHEL 5.
How to install and configure an optional remote on/off switch module.
Configuration for the switch module as an ON-only device.
Information on ordering the remote on/off switch module.
Guidelines for properly packaging equipment for return shipment.
Details original packing materials included with the system.
Step-by-step instructions for reassembling packing materials.
To Next Page
General
