Need help?Do you have a question about the Themis RES-12XR3 and is the answer not in the manual?
Lists detailed technical specifications including electrical, environmental, and physical attributes.
Step-by-step guide for installing hardware components like memory, PCI cards, and drives.
Detailed procedure for installing or replacing DDR3 FBD Memory Modules.
Guidance on installing PCI cards horizontally using riser cards in the 1RU chassis.
Steps for removing and installing SATA II storage drives, including front door access.
Procedures for removing and installing hot-swappable N+1 redundant power supplies.
Covers basic system operation, including power connection and turning the system on/off.
Details the main BIOS setup screen and system overview information displayed.
Covers advanced system settings related to boot, power, processor, chipset, and more.
Configures boot sequence options like Quick Boot, Quiet Boot, and boot device priority.
Settings for managing system power states, watchdog timers, and power button behavior.
Options for configuring CPU features, clock settings, cache, and thermal management.
Settings for chipset features, QPI, memory modes, and cache scrubbing.
Configures SATA, IDE, and floppy drive settings, including RAID and AHCI modes.
Manages PCI slot settings, latency timers, bus mastering, and onboard LAN ROM options.
Monitors system health, including CPU temperatures, fan speeds, and voltage readings.
Configures Advanced Configuration and Power Interface settings for power management.
To Next Page
General
