OvenOperations
Setting the Timer
• The oven has two Timers, which are independent of each other.
Neither timer controls oven operations.
• Touch once and the Timer is set in minutes and seconds.
• Touch twice and the Timer is set in hours and minutes.
To setTIMER 1 or TIMER 2:
Built-in Oven Care and Use Manual
You Will See
1. Select TIMER 1 or TIMER 2. Touch
TIMER 1
Message scrolls in display.
2. Set the amount of time.
(Example shows a 3-minute
setting with Timer 1.)
3. Start Timer.
4. When set time is complete,
"End" is displayed and 2 long beeps
signal. When turned off, display
reverts to time of day.
Nete: If timer is not turned off, beeps
will continue every 30 seconds. After 5
minutes, beeps stop and the display
reverts to the previous time of day.
Touch
300
Touch
START
Touch
TmMER OFF
MIN
TOUL°HTIflER 7RGRI#IFORHR5 RHD filff THEIY
SELEETLEflGTHOF TItlE THEHTDUEHSTRRT
MIN
To Cancel an Active Timer:
SelectTIMER 1 OFF orTIMER 2 OFF.
To Set Both TIMER 1 and TIMER 2:
• Follow the steps above to set each Timer. The Timer with the least amount of countdown time has
display priority. The countdown display for the second timer is shown automatically when the first
timer has ended.
• The words "TIMER 1" and "TIMER 2" are both displayed along with the number countdown.
• The designation, "TIMER 1" or "TIMER 2" with the least remaining countdown time is more brightly
lit than the other.
• During the countdown, touch CLOCK or TIMER. Depending on the pad touched, either the time of
day or the remaining time is briefly displayed.
To Change a Timer:
1. Touch TIMER 1 or TIMER 2.
2. Enter the new desired time.
3. Touch the START pad.
10
To Next Page
Loading...
Need help?
General
