Why does my Thermador PRD364NLGC Ranges have more than four clicks of igniter before lighting?
If your Thermador Ranges requires more than four clicks of the igniter before lighting, it could be due to an improper fit of the burner cap onto the burner base. Align the burner cap properly on the burner base.
How to fix Thermador PRD364NLGC oven operates on bake but fails to operate on timed bake?
If your Thermador Ranges oven operates on bake but fails to operate on timed bake, then set timer as outlined in the Use and Care Guide.
What to do if my Thermador PRD364NLGC won't operate?
If your Thermador Ranges won't operate (lights, oven, and surface burners will not come on), there are a couple of things you can check: * First, check for an open circuit breaker to ensure the unit is receiving power. * Second, verify that the oven is not in Sabbath Mode.
Why is my Thermador PRD364NLGC Ranges igniter sparking constantly?
Constant igniter sparking in Thermador Ranges can occur due to: * The range is not properly grounded. Please refer to the Installation Manual and have a qualified electrician ground the range properly. * The electrical power supply is incorrectly polarized. Refer to the Installation Manual and have a qualified electrician correct the polarization.
What to do if the Thermador PRD364NLGC door will not open?
If the door of your Thermador Ranges will not open, it might be because the oven is still in self-clean mode. If the oven is hot, the door latch will release when a safe temperature is reached.
How to fix Thermador PRD364NLGC Ranges igniters sparking but no flame?
If the igniters on your Thermador Ranges are sparking but there is no flame ignition, make sure that the gas supply valve is in the “ON” position to restore gas supply to the unit.
Why are foods in my Thermador PRD364NLGC not cooking sufficiently?
If foods in your Thermador Ranges are not cooking sufficiently, consider the following: * Check if the rack position is incorrect. * Make sure you are using proper cookware. * Ensure the oven door is sealing properly by cleaning the oven door gasket, and replacing it if worn. * Confirm the appliance is level.
How to fix intermittent igniter sparking in Thermador Ranges?
If you are experiencing intermittent igniter sparking with your Thermador Ranges, it could be due to a couple of reasons: * The ceramic igniter is wet or dirty. Carefully dry or clean the igniter. * The burner ports are clogged. Clean the ports on the burner cap with a wire, a needle, or a straightened paper clip.
What does ERROR COMM message mean on Thermador PRD364NLGC?
The ERROR COMM message on your Thermador Ranges indicates that to ensure customer safety in the event of power failure, the unit will display an error message upon reinstatement of power unless all oven knobs are set to OFF. To clear the message, set all oven knobs to OFF and reset the breaker.
Why is hot air coming from my Thermador Ranges?
Hot air coming from your Thermador Ranges is normal.
Essential safety guidelines for operating the appliance safely.
Guidelines for proper gas and electrical installation and grounding.
Precautions to ensure the safe use of the appliance by children.
Information on operating and using the STAR burners on the cooktop.
Advice for achieving best results in Bake and Convection modes.
Detailed steps and precautions for using the self-cleaning feature of the oven.
Common issues and their solutions for the appliance.
To Next Page
General