Thermador T36IB100SP - User Manual

Need help?

Do you have a question about the Thermador T36IB100SP and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document provides installation instructions and important safety information for a built-in refrigerator/freezer unit. The manual is presented in English, French, and Spanish.

Function Description:

This appliance is a built-in refrigerator/freezer unit designed for integration into kitchen cabinetry. It is intended for domestic use and requires proper installation to ensure safe and efficient operation. The unit features multiple compartments, including a refrigerator section and a freezer section, and is designed to be fitted with custom panels and handles to match existing kitchen decor.

Important Technical Specifications:

Dimensions:
- Overall height: 83 1/2" – 85 1/2" (2121 – 2171 mm)
- Width: 24" (608 mm)
- Depth: 35 1/4" (894 mm)
- Cutout width: 36" (914 mm)
- Cutout height: ≥ 25" (≥ 635 mm)
- Cutout depth: 16 1/2" (419 mm)
Weight:
- Max. 103 lbs (47 kg) for component A
- Max. 121 lbs (55 kg) for component B
- Max. 66 lbs (30 kg) for component C
- Total appliance weight: ≥ 541 lbs (≥ 246 kg)
Water Pressure: The water supply system requires a minimum of 29 psi (200 kPa) and a maximum of 116 psi (800 kPa).
Electrical Connection: The appliance requires a permanent electrical installation with an all-pole isolating switch integrated into the circuit, according to installation regulations. The power plug must be freely accessible after installation.
Door Opening Angle: The doors can open up to 115 degrees, with a 90-degree stop feature.
Panel Dimensions:
- 36" (914 mm) wide panels are used for the refrigerator and freezer doors.
- Panel weights: ≤ 117 lbs (≤ 53.2 kg), ≤ 35 lbs (≤ 16.2 kg), ≤ 104 lbs (≤ 47.4 kg) depending on the specific panel.

Usage Features:

Built-in Design: The appliance is designed to be integrated seamlessly into kitchen cabinetry, providing a flush and custom look.
Customizable Panels: The unit allows for the attachment of custom door panels and handles, enabling it to blend with the surrounding kitchen design.
Adjustable Leveling: The appliance features adjustable feet for leveling, ensuring stability and proper door alignment.
Anti-Tip Bracket: An anti-tip bracket is supplied to secure the unit and prevent it from tipping over, which is crucial given its top-heavy nature.
Water Connection: The unit includes a water connection for features like an ice maker or water dispenser, requiring a 1/4" compression coupling.
Door Stop: The door stop can be adjusted to limit the opening angle to 90 degrees, preventing damage to adjacent cabinetry.

Maintenance Features:

Ventilation: Proper ventilation is critical for the appliance's operation. Ventilation openings must not be closed off, and the appliance casing or integrated casing must be clear of obstruction to prevent the buildup of flammable gas-air mixtures.
Power Cord: The power cord should be regularly checked for damage. If damaged, it must be replaced by a qualified electrician. Avoid contact with heat sources.
Water Hoses: Use only new, re-use water hoses that have been used before. Avoid kinking, crushing, or cutting water hoses. Clean fittings and accessories in the dishwasher to prevent deformation or discoloration.
Cleaning: The manual emphasizes cleaning fittings and accessories in the dishwasher to prevent deformation or discoloration.
Professional Installation/Repair: In case of issues with the power cord or water pressure, it is recommended to contact a qualified electrician or technician for repair or adaptation.
Protective Gloves: Wear protective gloves when handling the appliance to prevent cuts from sharp edges.
Two-Person Transport: Due to its heavy weight, the appliance must be transported by two or more people to prevent injury.
Mullion Rail: If the appliance door is closed, the mullion rail should be closed (flush with the door edge) or damage may occur. Never open the mullion rail manually. If the mullion rail has been opened, rotate it closed (flush with the door edge) before closing the appliance door.