Need help?Do you have a question about the Thermador VCIN36GWS and is the answer not in the manual?
Indicates death or serious injuries may occur from non-observance.
Indicates minor or moderate injuries may occur from non-observance.
Indicates damage to appliance or property may occur from non-compliance.
Disconnect power before servicing to reduce injury risk.
Observe precautions for fire, electric shock, or injury to persons.
Details electrical shock hazards like improper grounding or using extension cords.
Ensures proper grounding to reduce electric shock risk.
Lists compliance with UL and CSA standards for fans and ventilators.
Warns about exposure to vinyl chloride, a known carcinogen.
Key steps and precautions before starting the installation process.
Provides detailed measurements and diagrams of the hood model.
Specifies necessary clearances for hood installation above cooking surfaces.
Guidance on selecting hood width relative to the cooking surface for optimal performance.
Recommended installation height range above the cooking surface.
Blowers integrated into the hood at the time of installation.
Blowers mounted on the roof or exterior wall for reduced kitchen noise.
Blowers mounted along the duct line to minimize kitchen noise.
Describes how exhaust air is discharged upwards or through the outside wall.
Advises on proper ducting, avoiding flexible duct, and venting to outdoors.
Overview of integral, remote, in-line blowers and extension cable accessory.
Details discharge direction and steps for assembling the air transition.
Provides dimensions for creating the housing and cutouts for the unit.
Outlines the process for installing the custom insert and hood trims.
Guide for installing the unit, blower motor, ductwork, and wiring.
Instructions for installing filters/trays and performing installation tests.
Table listing blower models, SKU, voltage, current, and breaker ratings.
Steps for installing integral blower models into the hood.
Steps for preparing and routing blower wire harnesses.
Guidance on installing in-line and remote blowers.
Steps for connecting the blower's wire harness to the hood.
Details power supply connection and wire hookups.
Guidance on installing the Make-Up Air Damper relay switch.
Instructions for connecting the blower extension cable.
Step-by-step guide for installing the built-in remote control.
Instructions for inserting baffle filters and grease trays into the hood.
Checklist for final installation checks and owner information.
Cleaning and maintenance instructions for stainless steel surfaces.
Guidance on troubleshooting and preparing for service calls.
Information on locating the model and serial number on the data label.
Contact details and support resources for Thermador customers.
Information on purchasing filters, cleaners, and replacement parts.
General| Color | stainless steel |
|---|---|
| Hood Type | insert |
| Venting Type | ducted, external |
| Number of Fan Speeds | 4 |
| Duct Diameter | 9 4/5 inches |
| Control Type | touch pad |
| Interior Light | yes |
| Voltage | 120 volts |
Weight and Dimensions| Depth | 22 inches |
|---|---|
| Height | 12 13/16 inches |
| Width | 33 3/4 inches |
| Net Weight | 54 pounds |
To Next Page