To Next PageTo Next Page
Need help?Do you have a question about the Thermaltake Pure 14 ARGB Sync and is the answer not in the manual?
Install the fans properly onto the radiator for optimal airflow and mounting.
Connect the fans in series to ensure proper power and signal distribution.
Connect the PWM cable from the fan controller to the mainboard for speed control.
Connect the fan power cable to the PWM cable for integrated system control.
Connect the ARGB controller to the fans to manage lighting effects.
Connect the ARGB controller to the SATA power connector for operation.
Connect the mainboard signal bridge cable to the fan LED cable for synchronization.
Connect to ASUS Aura Addressable Strip Header(s) for lighting control.
Connect to MSI JRGB-strip Header(S) for lighting control.
Connect to ASROCK Addressable RGB LED Header(s) for lighting control.
Connect to GIGABYTE AOURS RGB Fusion with Digital LEDs for lighting control.
Caution: Power off PC and check positive/negative ends before connecting to mainboard.
Switch between 7 LED modes for various lighting effects.
Switch between 8 LED colors for specific lighting modes.
Switch between 4 light speed modes: Slow, Normal, Fast, Extreme.
General| Type | Case Fan |
|---|---|
| Fan Size | 140 mm |
| Fan Dimensions | 140 x 140 x 25 mm |
| Color | Black |
| LED Type | ARGB |
| Bearing Type | Hydraulic Bearing |
| Connector | 4-Pin PWM |
| Rated Voltage | 12 V |
| MTBF | 40, 000 hours |
| Life Expectation | 40, 000 hours |
