EasyManua.ls Logo

THERMEAU TH140 - User Manual

Default Icon
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S Manual
PRINTED IN CANADA
Question and Answer IconNeed help?

Do you have a question about the THERMEAU TH140 and is the answer not in the manual?

Summary

Safety Information

Understanding Safety Symbols

Explains the meaning of IMPORTANT, CAUTION, and WARNING signs used in the manual.

Safety Precautions

Electrical Connection Safety

Emphasizes that electrical connections must be performed by a qualified electrician.

Pool Water Chemistry Importance

Highlights the critical role of proper pool water chemistry for heater longevity.

Residential Product Specifications

Commercial Product Specifications

Installation Instructions

Location and Clearances

Guidance on optimal placement, ventilation, and minimum clearances for installation.

Water Piping Installation

Piping Sequence and Connections

Details the correct sequence for water piping, material recommendations, and leak checks.

Multiple Heat Pump Plumbing

Parallel Installation Guidelines

Instructions for parallel plumbing of multiple heat pumps and flow rate requirements.

Electrical Safety and Bonding

Electrical Safety Warnings

Covers CAUTION and WARNING statements regarding electrical work and panel access.

Bonding System Requirements

Explains the necessity of bonding all metal and electrical components for safety.

Bonding and Plumbing Steps

Step-by-step instructions for integrating bonding and plumbing components.

Electrical Connections and Protection

Installation by Certified Electrician

Reiterates the requirement for professional installation by a certified electrician.

Phase Loss and Reversal Protection

Explains how the unit detects and reacts to incorrect phase sequence or loss.

Wiring Diagrams

Service Analyzer Control Panel

Control Panel Overview

Describes the control panel's display, indicators, and buttons for operation.

Electronic Temperature Control Guide

Setting Temperature and Modes

Guide to using buttons to set pool/spa temperatures and select modes (POOL, SPA, C/F).

Remote System Connectivity

2-Wire Remote Connection

Instructions for connecting 2-wire remote control systems to the unit.

3-Wire Remote Connection

Instructions for connecting 3-wire remote control systems to the unit.

Initial Startup Procedure

Pre-Startup Checks

Important checks to perform before the first-time startup of the pool heater.

Startup Operation Behavior

Explains normal operation during initial startup, including fan/compressor delay and condensation.

Display Code Reference

Service Analyzer Error Codes

A list of codes displayed by the service analyzer and their corresponding meanings for troubleshooting.

Troubleshooting Common Issues

Heater Not Starting or Flo Error

Solutions for common problems like the heater not running or displaying a "flo" error code.

Fan Running, Compressor Not

Explains issues related to protection mode and defrost cycles when the fan runs but the compressor does not.

Troubleshooting Advanced Issues

No Display or Water Leaks

Addresses troubleshooting for units with no display, fan issues, or water around the unit.

Reaching Desired Temperature

Solutions for when the heater is running but unable to reach the target water temperature.

Service, Maintenance, and Winterizing

Requesting Assistance

Guidelines for seeking assistance, including contact numbers and required information.

Routine Maintenance

Instructions for cleaning the evaporator and cabinet to ensure proper operation.

Winterizing the Unit

Steps for draining the unit and preparing it for storage during the winter season.

Commercial Warranty Details

Residential Warranty Details

Florida State Warranty Details

THERMEAU TH140 Specifications

General IconGeneral
BrandTHERMEAU
ModelTH140
CategorySwimming Pool Pump
LanguageEnglish

Related product manuals