To Next PageTo Next Page
Need help?Do you have a question about the Thermedx FluidSmart and is the answer not in the manual?
Details the available disposable tubing sets and their specifications for use.
Lists conditions and situations where the device should not be used.
General safety precautions for using the FluidSmart® device.
Safety considerations for general distention procedures.
Safety considerations for hysteroscopic distention procedures.
Safety considerations for bladder distention procedures.
Safety considerations for joint distention procedures.
Instructions for replacing fluid bags during operation.
Instructions for changing suction canisters during operation.
Procedures and alerts related to low fluid bag volumes.
Overview of the help menu and available topics.
Troubleshooting steps for no or low fluid flow issues.
Troubleshooting steps for deficit readings appearing too high.
Troubleshooting the tissue removal system.
Setup guide for single canister suction.
Setup guide for multiple canister suction.
Troubleshooting issues related to the heating function.
Troubleshooting steps for deficit readings appearing too low.
Information about the interactive run screen.
Procedures for changing the fluid type used.
Specific instructions for ureteroscopy procedures.
Information and configuration of the perforation alarm.
How to print volume and deficit data.
Adjusting alarm and bag chime sound levels.
Explains various alarm conditions and their responses.
Details error messages and troubleshooting steps.
Explains various warning messages and their implications.
Outlines the coverage and duration of the product warranty.
Details the restrictions and exclusions of the product warranty.
Steps to resolve issues when the device fails to power on.
Solutions for alarms appearing during device startup.
Troubleshooting for low flow or poor visualization issues.
Specific troubleshooting for hysteroscopic tissue removal.
Steps to take if the device emits a burning smell.
Troubleshooting common noises from the device.
Steps to resolve issues with fluid warming.
Troubleshooting for device operating above temperature set-point.
Addressing persistent over-temperature alarms.
Steps to resolve readings where deficit appears too high.
Steps to resolve readings where deficit appears too low.
Troubleshooting erratic or unreadable pressure readings.
Steps to resolve printer issues.
Troubleshooting the secondary display.
Resolving issues with suction canister fit.
Steps to correct incorrect fluid bag volume indicators.
Steps to correct incorrect total fluid volume readouts.
Troubleshooting a leaking relief valve on the tubing set.
Physical dimensions and weight of the device.
Operational conditions including temperature and humidity.
Conditions for transporting the device.
Conditions for storing the device.
Details on temperature set-point selection and tolerance.
Information on irrigation bag capacity.
Information on suction canister capacity.
Accuracy specifications for fluid measurement.
Electrical requirements for P2000 and W2100 models.
Part numbers for the main base units.
Part numbers for disposable tubing sets.
Common symbols for attention, catalog, serial, and warnings.
Symbols related to temperature, humidity, fragility, and reuse.
General| Technology | Fluid management system |
|---|---|
| Fluid Collection Capacity | 3000 mL |
| Display | LCD touchscreen |
| Battery Life | Up to 4 hours |
| Weight | 15 kg |
| Accuracy | +/- 1°C |
| Power Source | AC power |
| Data Output | USB, Ethernet |
| Category | Medical Equipment |
| Alarms | High/low temperature, fluid level, system error |
| Intended Use | Fluid warming and management during medical procedures |
