THERMEX READING M 540231361226042018
72
ENGLISH
»
INSTALLATION
Measure the placement of the bracket
and mark the position of the holes on the
wall.
NOTE: The bracket must be positioned so
that it matches the holes in the duct.
Pre-drill the holes and insert the
rawlplugs.
Screw the bracket onto the wall.
1
3
Place the duct on the hood.
NOTE: Fasten the duct with two screws.
4
Push the topmost section of the duct
upwards and attach it to the bracket
with the two self-tapping screws.
5
2
x2
x2
x2
x2
x2
To Next Page
Loading...
