Initial Set Up
12345
1. Date
2. Model Number
3. Firing Rate
4. Pump Pressure*
5. CO2
6. “0” Smoke
7. Gross Stack°F
8. Draft Over Fire
9. Replaced Filter Yes/No
10. Replaced Nozzle Yes/No
11. Clean Pump Filter Yes/No
12. Inspect Coil Gasket
13. Check for Leaks @ plugs/fittings
14. Brush Clean Flue Tube Passages
15. Vacuum Chamber/Flue Tubes
16. Clean Blower Wheel
17. Check/Set Electrodes
*See pump pressure according to the installer/serviceman labels starting on page 24.
BURNER SERVICE SET-UP RECORDS
To Next Page
Loading...