- 4 -
Battery backup of all entered parameters and alarm levels is maintained when the batteries are
removed. The instrument is prevented from rate measurement should the parameters become
corrupted due to failure of the backup battery.
The unit is powered by three standard ‘C’ size cells of either Primary or rechargeable type.
Rechargeable cells may be recharged in the unit by means of an optional mains operated
charger which can be connected via a socket in the end of the unit. The charger unit also
doubles as a DC supply, which can be used without batteries fitted, if the unit is installed in a
fixed position.
A test mode is provided to aid customer testing and error messages are provided in normal use
to assist fault finding and diagnosis.
There are two versions of the ELECTRA:
ELECTRA1A is to be fitted with a PET probe connector.
ELECTRA1B is fitted with an MHV connector.
To Previous Page
Loading...
