Thermo Electron EPD MK2 - Getting Started; 2.1 Setting-up

ELECTRONIC PERSONAL DOSEMETER HANDBOOK
EPD/HB/40521/000
GETTING STARTED
ISSUE 5
Thermo
Page 5
SECTION 2
GETTING STARTED
This section describes the general procedures that must be carried out to ensure
that the EPD is set-up correctly and is functionally operational.
2.1 Setting-up
The EPD requires very little setting-up. Setting-up is primarily confined to:
1. Unpacking the EPD,
2. Inserting the battery,
3. Checking the initialisation sequence,
4. Checking the default settings,
5. Performing a confidence test.
A general view of the EPD is shown in Figure 2.1. External features are described
in Table 2.1.
Figure 2.1 - External View Of The EPD
Feature Description