Thermo King ClimaAIRE BEA114 - User Manual

Alarms
The Alarm LED will illuminate in the following two conditions:
• high or low pressure switches are off longer than 10 minutes
• high or low pressure switches are off 5 times per 10 minutes
(flash on and off).
In both cases, the unit will switch to the Ventilation mode.
To restart the unit, press twice the key ON/OFF (1) to switch OFF
and ON the unit.
Warranty Instructions
Should you require warranty service during the warranty period,
simply present your copy of the Warranty Certificate at any of the
dealer locations shown in the Thermo King Service Directory.
Terms of the complete Thermo King Corporation Warranty are
available on request.
Controller
Operator’s
Manual
Control Panel Descriptions
Operating Instructions
Alarms
ATTENTION: If the alarm comes up again, don’t
restart and see your nearest dealer for service.
CAUTION: The unit can automatically start and run
anytime the ignition key is in the ON or OFF position.
No matter if the ON/OFF switch is ON or OFF
(depends on setup program).
AJA831
BEA114
TK 51711-3-PC (10-05)
Copyright © 2005 Ingersoll-Rand Climate Control ESA
CAUTION: This is a driver’s reference guide.
If further information is required, consult your
Thermo King service directory for the location
and phone of the local dealer.

Summary

Alarms

Alarm Conditions and Restart

Describes conditions for Alarm LED illumination and how to restart the unit.

Important Operational Precautions

Covers crucial warnings regarding automatic unit start and repeating alarms.

Warranty Instructions

Operating Instructions

System Power and Mode Adjustment

Guidance on turning the system ON/OFF and adjusting settings via mode, speed, and air mode keys.

Control Panel Button Functions

Detailed description of each control panel button and its function.

Thermo King ClimaAIRE BEA114 Specifications

General

Brand	Thermo King
Model	ClimaAIRE BEA114
Category	Controller
Language	English