Thermo Ramsey MINI 11-100F

Need help?

Do you have a question about the Thermo Ramsey MINI 11-100F and is the answer not in the manual?

Summary

Introduction to the MINI 11-100

Technical Specifications

Details on the instrument's technical characteristics and capabilities.

Instrument Installation Procedures

Mounting Instructions

Electrical Connections Guide

Guidance on wiring and connecting the instrument electrically.

Supply Voltage Requirements

Setting Scale Parameters

Instrument Setup Procedure

Step-by-step guide for configuring instrument settings.

Setting Scale Capacity

How to define and set the maximum weighing capacity.

Scale Calibration Methods

Auto Zero Calibration

Procedure for performing an automatic zero point calibration.

Auto Span Calibration with Sample Weights

Calibrating the span using physical sample weights.

Auto Span Calibration with Electronic Resistor

Calibrating the span using an electronic resistor.

Electronic Span Calibration Procedure

Step-by-step for electronic span calibration.

Modifying Filter Factor

Keyboard Access Protection

Enabling Password Protection

Steps to enable or disable password protection.

Modifying the Access Password

Procedure for changing the existing password.

Normal Operation and Key Functions

Using the Tare [-T-] Key

Explanation of the function and usage of the [-T-] key.

Alarm Management and Identification

Alarms Identification Guide

How to identify the causes of different alarms.

Resetting Alarms

Procedure for clearing active alarms.

Enabling;Disabling Alarm Functions

Steps to activate or deactivate specific alarm functions.

Optional and Special Functions

Setting Thresholds (1-4)

Configuring up to four alarm thresholds with various parameters.

Digital Input Configuration

Digital Output Configuration

AZT Option (Auto Zero Tracking)

Current (mA) Output Configuration

Instrument Test Functions

Maintenance and Calibration Checks