EasyManua.ls Logo

Thermo Scientific CryoExtra 40 CE8140 User Manual

Thermo Scientific CryoExtra 40 CE8140
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CRYOEXTRA CE8100 SERIES
Liquid Nitrogen Storage System
Operating and Maintenance Manual
326636H01 Revision C April 2020
Question and Answer IconNeed help?

Do you have a question about the Thermo Scientific CryoExtra 40 CE8140 and is the answer not in the manual?

Thermo Scientific CryoExtra 40 CE8140 Specifications

General IconGeneral
BrandThermo Scientific
ModelCryoExtra 40 CE8140
CategoryIndustrial Equipment
LanguageEnglish

Summary

Safety and First Aid

Liquid Nitrogen Safety

Guidelines for safe handling and transfer of liquid nitrogen, including recommended protective equipment.

Recommended First Aid

First aid procedures for exposure to cryogenic liquids or cold vapor, and general asphyxia symptoms.

Product Information

Intended Use

Specifies the intended use of the cryogenic storage models and medical device versions.

Controller Display

Controller 12-Pin Wiring Harness Connections

Specifications

Installation and Startup

Installation

Basic instructions for receiving, unpacking, and installing the CryoExtra freezer.

First Fill Startup Procedure

Detailed steps for performing the initial LN2 fill and startup sequence.

Operation

Automatic Liquid Nitrogen Level Control

Details on the automated system for maintaining LN2 levels and alarm settings.

User Defined Alarms

Description of the 18 audible/visual alarms for monitoring freezer status.

Remote Alarm Monitoring

Passwords / Security

Details on the multilevel security system and password management.

Communication / Networking Capabilities

Event Log And Event Codes

Hot Gas Bypass

Temperature Settings

Temperature Alarm Settings

How to navigate and adjust temperature alarm settings for sensors A and B.

Liquid Nitrogen Saturation Temperature

Liquid Level Settings

Instructions on adjusting LN2 level setpoints and alarms.

Additional Feature Settings

Display and Output Settings

Restart Controller

Password / Security Setup

Calibration Procedures

Temperature Sensor Calibration

Describes single point and two point calibration for temperature sensors.

Liquid Nitrogen Level Calibration

Liquid Level Calibration

Procedure to calibrate the LN2 level measurement system.

Hot Gas Bypass Sensor Calibration

Communication / Networking

Controller Menu Maps

Preventative Maintenance

Preventative Maintenance Schedule

Recommended periodic preventative maintenance tasks and schedule.

Preventative Maintenance Procedures

Detailed procedures for performing maintenance tasks like leak checks and alarm tests.

Replacement Parts and Accessories

Troubleshooting Quick Reference

Appendix

Controller ASCII Interface

Reference for ASCII commands used to query and adjust Controller settings.

Related product manuals