To Next PageTo Next Page
Need help?Do you have a question about the Thermo Scientific Neslab Merlin M 100 and is the answer not in the manual?
General| Cooling Capacity | 1000 W at 20°C |
|---|---|
| Temperature Stability | ±0.1°C |
| Pump Type | Centrifugal |
| Flow Rate | 15 L/min |
| Refrigerant | R404A |
| Electrical Requirements | 230V, 50Hz |
Provides contact information and details for service, spare parts, and service contracts.
Details critical safety precautions, including electrical, fluid, and operational hazards.
Provides a concise guide for installing and operating the chiller unit.
Details technical specifications for various Merlin chiller models, including temperature range and capacity.
Guides users on proper installation site selection and environmental considerations.
Details electrical specifications, power options, and safety considerations for unit installation.
Explains how to connect the chiller's fluid inlet and outlet lines correctly.
Lists acceptable cooling fluids and their operating temperature ranges, with important fluid handling warnings.
Describes the controller's function, interface, and basic operation of its buttons and indicators.
Outlines the steps for safely starting, stopping, and setting parameters for the chiller.
Explains how to set and manage high and low temperature alarm limits.
Describes how to enable/disable serial communication and remote operation modes.
Provides instructions on how to properly shut down the chiller and ensure safety.
Explains how to configure controller settings, fault reactions, and PID parameters.
Troubleshoots problems related to the unit failing to start or shutting down unexpectedly.
Addresses problems where the chiller fails to circulate cooling fluid properly.
Helps diagnose and resolve issues with the chiller not maintaining the set temperature.
Lists available commands, their format, and expected unit responses for serial communication.
