Need help?Do you have a question about the Thermo Scientific Sorvall X4 Pro-MD and is the answer not in the manual?
General| Maximum Capacity | 4 x 750 mL |
|---|---|
| Application | Clinical, Research |
| Temperature Range | -10°C to +40°C |
| Control System | Microprocessor |
| Acceleration/Deceleration Profiles | 9/10 |
| Programs | 99 programs |
| Certifications/Compliance | CE, UL |
| Motor Type | Induction motor |
| Power Requirements | 50/60 Hz |
| Dimensions (W x D x H) | 71 cm |
| Weight | 150 kg |
Specifies the intended applications and purpose of the centrifuge.
Outlines critical safety precautions for operating the centrifuge.
Step-by-step guide for installing and removing rotors from the centrifuge.
Instructions on how to properly load samples into the rotor.
Guide to setting fundamental parameters like speed, time, and temperature.
Instructions for pre-conditioning the centrifuge chamber to a specific temperature.
Detailed steps and options for running the centrifugation process.
Procedures and principles for using aerosol-tight rotors and lids for safe operation.
Explains how to configure core centrifugation parameters via the GUI.
Details the process of pre-tempering the chamber using the GUI.
Steps for initiating and managing centrifugation runs via the GUI.
Information on viewing centrifuge status, alarms, and alerts through the GUI.
Accessing and configuring various settings via the GUI.
Explains how to set up parameters using the LCD control panel.
Describes how to use the program functions on the LCD control panel.
Steps for running centrifugation using the LCD control panel.
Procedure for manually opening the lid in case of power failure or malfunction.
A table listing common error messages and their corresponding troubleshooting steps.
Technical specifications for the Sorvall X Pro series centrifuges.
Technical specifications for the Sorvall ST Plus series centrifuges.
Table detailing the compatibility of various chemicals with centrifuge materials.
To Next Page