BTH ULTRA Electric Boilers Installation & Operation manual (Revision: May 2015)
6
.
3.4 PIPING INSTALLATION
The inlet and outlet piping of the boiler must be in conformity with the different configuration shown below.
Make sure that the fluid flow is in the proper direction.
Figure 3 : Mounting positions
3.4.1 Type of installation
You will find below on figures 4 to 8 the typical piping arrangement for the two main types of installation.
The first being as a self-operating unit and the others being connected to an auxiliary boiler in dual-
energy.
Figure 4 : Typical Installation on heating floor
To Next Page
Loading...