Thermocable ProReact EN Analogue - Kit Contents

Page 3 of 8 Revision 1.0 Mar 2020
ProReact EN Analogue Cable Test Kit Instructions
Document Ref. PACC-CTK
ProReact EN Analogue Sensor Cable Test Kit
Overview
The ProReact EN Analogue Sensor Cable Test Kit provides users with a
practical and safe method of verifying the operational performance of
Thermocable’s ProReact EN Analogue Sensor Cable post-installation.
Testing is recommended to be undertaken periodically to ensure correct
operation of the system. The functional test must be carried out on 1-3%
of the total sensor cable length, which should have been made accessible
during the system design and installation as per the manufacturer’s
recommendations.
A functional test is straightforward to be undertaken and a test kit can be
re-used where necessary.
Kit Contents
Each ProReact EN Analogue Sensor Cable Test Kit (A1900) contains:
Part Code Product Description Quantity Spare part availability
A1904 120V/240Vac to 50Vac Power supply unit 1
3
A1901 ProMinder Red Cable for zone lengths between 50m to 125m 1
3
A1902 ProMinder Blue Cable for zone lengths between 100 to 350m 1
3
A1903 ProMinder Brown Cable for zone lengths between 175m to 500m 1
3
A1905 35x450mm length (10mm internal diameter) pipe insulation 1
3
A1175-100 110°C constant rated indoor/outdoor tie wrap (Pack of 100) 1
3