Unpacking
Check if the unit has been damaged in any way.
Environment
To prevent damage during transport this unit is supplied in robust packaging. Please re-
cycle the packaging where possible.
Contents
1 instantaneous water heater (Hydrex/Elex 18, 21, 24 kW)•
1 mounting template•
1 bag of installation materials, contents: •
1 isolating valve (stop valve)
1 nipple
2 gaskets
4 spacers
4 plugs
4 screws
Tools You will require the following tools for the installation:
Cross-head screwdriver •
Open-ended spanners, 17 and 19 mm•
Teontape•
Drill•
6 mm stone or concrete drilling bits•
Pencil•
Adhesive tape•
Wire strippers•
To Next Page
Loading...
Need help?
General
