Need help?Do you have a question about the Thermogroup 5220 and is the answer not in the manual?
General| Brand | Thermogroup |
|---|---|
| Model | 5220 |
| Category | Thermostat |
| Language | English |
Specifies compatibility with Thermogroup NTC 10K floor sensor probes.
Using ambient sensing if existing floor probe is incompatible.
Advice for contacting support regarding existing floor sensors.
Safety instruction to turn off power before installation.
Guidance on suitable wall and back box placement for the thermostat.
Specifies the maximum cable length for thermostat and sensor connections.
Steps to detach the UK mounting plate from the thermostat fascia.
Illustrates connections for power supply, UFH, and floor sensor.
Instructions for securing the UK mounting plate to the wall.
How to clip the UK thermostat fascia onto the mounting plate.
Instructions for securing the Australian mounting plate to the wall.
How to clip the Australian thermostat fascia onto the mounting plate.
Important steps and considerations before powering up the thermostat.
Thermostat maintains a manually set temperature.
Thermostat follows a pre-set heating schedule.
Temporarily changing set temperature during a schedule.
How to enable/disable the thermostat's key lock function.
Procedure to restore thermostat to default settings.
Feature that learns heating time to reach target temperature by the set time.
Feature that switches off heating when sudden temperature drops are detected.
To Next Page
