THERMOLYNE F6010 - User Manual

LT711X1• 9/27/2006 Serial Number: _________________________________
Type F6000 Furnace
OPERATION MANUAL
AND PARTS LIST
Series 711
MODEL NUMBER VOLTAGE CONTROL DISPLAY (°C&°F) RS232 COMM.
F6010 220-240 Basic Automatic X (°C only)
F6010-33 220-240 Basic Automatic X (°C only)
F6018 208 Basic Automatic X (°C only)
F6020C 220-240 Automatic X
F6020C-33 220-240 Automatic X
F6020C-33-60-70 220-240 Automatic X
F6020C-70 220-240 Programmable X
F6020C-33-70 220-240 Programmable X
F6028C 208 Automatic X
F6028C-70 208 Programmable X
F6030CM 220-240 Programmable X X
F6038CM 208 Programmable X X
F6020C-60 220-240 Automatic X
F6020C-60-70 220-240 Programmable X
F6028C-60 208 Automatic X
F6028C-60-70 208 Programmable X
F6030CM-60 220-240 Programmable X X
F6038CM-60 208 Programmable X X
(-60 Models) - Ashing furnace

Summary

Safety and Alerts

Safety Information

Warnings

Electrical Shock and Burn Precautions

Details precautions to avoid electrical shock and burns from the furnace.

Material Hazards and Personal Injury Risks

Outlines risks from refractory ceramic fiber and other materials, and safe handling.

Principles of Operation

Furnace Design and Controller Types

Setup Procedures

Electrical Connections and Safety

Details wiring requirements, safety precautions, and grounding for safe electrical hookup.

Basic Automatic Control Operation

Automatic Control Functionality

Controller Features and Operation

Automatic Control Settings

Setpoint Adjustment and Tuning

Automatic Control Safety Features

Temperature Indication and High Alarm

2-Ramp;2-Dwell Programmable Control

Programmable Control Parameters

Parameters and Controller Tuning

Lists and explains control parameters and the automatic tuning process.

Programmable Control Tuning

Self-Tuning Feature Operation

Details the process and benefits of the automatic self-tuning feature for optimal accuracy.

Controller Operation Modes

Single Setpoint and Program Execution

Guides on single set point mode and programming controller parameters like ramps and dwells.

Program Management

Implementing Programs and Holdback

Covers implementing programs, execution, holdback features, and program hold/idle.

8-Ramp;8-Dwell Programmable Control

Advanced Programmable Parameters

Parameters and Adaptive Tuning

Multi-Program Controller Operation

Single Setpoint and Program Setup

Program Entry and Logic

Program Linking and Segment Setup

Runtime Program Control

Parameter Changes and Program Hold

Program Control and Air System

Program Reset and Air Control Setup

Maintenance and Servicing Schedule

Preventative Maintenance and Cleaning

Troubleshooting Common Issues

Problem Diagnosis and Solutions

Lists common problems, their probable causes, and recommended solutions.

THERMOLYNE F6010 Specifications

General

Brand	THERMOLYNE
Model	F6010
Category	Furnace
Language	English