max.
40 in
Automatic coffee machine Black&White 3 CTS
Connection 208 VAC | 30 A | 60 Hz
Output 6200 W
Dimensions 20.4 x 23.6 x 30.5 (32.4) in (W / D / H)
Coffee spout hight standard 3.14-6.8 in
Weight 172 lb
Water connection 3/8“
Water pressure 2-4 bar / 30-60 psi
Chlorine none
TDS 70-200 ppm
Hardness 5-8 °dH (8-14 °fH)
pH 6.8-7.4
Alkalinity less than 100 ppm
Iron less than 0.25 ppm
Conversion table water hardness
Water hardness DE FR EN Ppm Mval/l
1° dH 1.0 1.79 1.25 17.8 0.357
1° fH 0.56 1.0 0.7 10.0 0.2
1° e 0.8 1.43 1.0 14.3 0.86
1° ppm 0.056 0.1 0.07 1.0 0.02
1 mval/I 2.8 5.0 3.5 50.0 1.0
For more information see Technical Manual.
Drainage
The distance between the drain
and the machine must not be more
than 40 in. Make sure there is no
dip or any back pressure in the
drain hose. The end of the hose
must not be in the water.
Hole 5.9 x 5.9 in for coffee grounds drawer.
Special grounds drawer needed.
Hole diameter 2.7 in for water inlet and outlet.
Also possible for electric cords.
Cut sheet CTS (USA / CAN)
Space above
the machine
Space
behind
the
machine
13.7
2
optional
30.5
32.4
20.4
23.6
9
3.3 lb
4.8 lb
Need help?
General
