ThermoPro TP-60 User Manual

Indoor/Ourdoor humidity & Temperature Monitor
INSTRUCTION MANUAL
Model No. TP-60
Introduction
Congratulations on your purchase of the Professional Indoor/Ourdoor humidity & Temperature Monitor
, You will now be able to detect indoor and outdoor temperature and humidity.And can remember the past all-
time and the past 24 hours, the maximum and minimum data
Components
1. One Receiver unit
2. One Transmitter unit
3. Four AAA batteries
Receiver Features
1. display : Displays the current outdoor humidity /temperature,and indoor humidity / temperature,
2. Battery Compartment: Holds 2* AAA battery to power the unit.
3. Totally wireless tabletop and wall-mounted design.
4. Indoor Temperature range: -4 °F ~ 158°F (-20 °C ~ 70 °C).
5. Humidity range: 10% ~ 99%.
6. Temperature display unit: °C °F selectable
7. Temperature Resolution: 0.1 °C/°F
8. Humidity Resolution:1%
9. Low battery indication
Buttons
Channel/SYNC: press to Change between remote outdoor sensors1、2、3；Press and hold CHANNEL button
to search for the sensors.

ThermoPro TP-60 Specifications

General

Temperature Range	-58°F to 158°F (-50°C to 70°C)
Humidity Range	10% to 99%
Display	LCD
Power Source	2 x AAA batteries
Wireless Range	200 feet (60 meters)
Refresh Rate	10 seconds
Features	Backlight
Humidity Accuracy	±2% (at 20% to 80% RH), ±3% (at 10% to 20% RH and 80% to 90% RH)

Summary

Using the Transmitter and Receiver

Initial Transmitter Search

Receiver auto-searches for transmitter upon power-up.

Manual Transmitter Search

Press and hold CHANNEL button to search if needed.

Placement Guidelines

Receiver Station Placement

Place receiver in a ventilated indoor area, away from heat/sun.

Transmitter Placement

Place transmitter indoors/outdoors, away from direct sun/moisture.

Transmission Range

Ensure transmitter is within 200 feet (60m) of receiver with minimal obstructions.

Troubleshooting and Tips

Connection Issues

Check CHANNEL button, press TX, or relocate units for connection problems.

Interference Sources

Keep units away from other electronic devices causing interference.

Temperature Effects on Performance

Extreme temperatures may affect transmitter performance; replace batteries.

FCC Compliance Information

FCC Part 15 Compliance

Device complies with FCC rules, avoiding harmful interference.